Ata Error Icrc Unc Idnf Abrt
Contents |
Overview All libata error messages produced by the kernel use a standard format: ata3.00: exception Emask 0x0 SAct 0x0 SErr drdy err unc 0x0 action 0x2 frozen ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask
Sata Error Register
0x4 (timeout) ata3.00: status: { DRDY } Prefix The prefix ata3.00: decodes as ata prefix, indicating this is what is drdy a libata port or device message 3 port number, counting from one (1) 00 device number, usually zero unless Port Multiplier or PATA master/slave is involved Exception line The exception options libata noacpi=1 line gives an overview of the EH (Error Handler) state. exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Emask Error classification bitmask (AC_ERR_xxx in source code) SAct SATA SActive register SErr SATA SError register action ATA_EH_xxx actions, like revalidate, softreset, hardreset (see include/linux/libata.h) frozen if present, indicates the port was frozen for EH t
Icrc Abrt
taskfile The "cmd" line gives the ATA command (taskfile) sent to the device: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 This lists ATA registers in the following order: Command (separator) Feature NSect LBA L LBA M LBA H (separator) HOB Feature HOB NSect HOB LBA L HOB LBA M HOB LBA H (separator) Device/Head tag NCQ tag number, or listed as zero if NCQ is not active/applicable. Output taskfile, error summary The next line contains a current dump of the ATA device's registers, along with an error summary: res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) In order: Status (separator) Error NSect LBA L LBA M LBA H (separator) HOB Error HOB NSect HOB LBA L HOB LBA M HOB LBA H (separator) Device/Head Emask ATA command's internal error mask (AC_ERR_xxx in source code) (summary) An English summary of the error, such as timeout HSM violation media error See below for a full list. Error classes These are the possible values for the (summary) in each error message, above. host bus error Host<->chip bus error (i.e. PCI, if on PCI bus) ATA bus error ch
9th, 2009, 07:25 AMHi all I have problem with my drdy error ubuntu boot System the log always spam with these messages : .......... status drdy err centos 68489.756311] ata3.00: status: { DRDY ERR } [68489.756314] ata3.00: error: { UNC } [68489.951583] ata3.00: configured
Hsm Violation Ubuntu
for UDMA/133 [68489.951604] ata3: EH complete [68492.671124] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [68492.671133] ata3.00: BMDMA stat 0x24 [68492.671140] ata3.00: cmd c8/00:08:55:e8:8d/00:00:00:00:00/e2 https://ata.wiki.kernel.org/index.php/Libata_error_messages tag 0 dma 4096 in [68492.671142] res 51/40:00:56:e8:8d/00:00:00:00:00/02 Emask 0x9 (media error) [68492.671145] ata3.00: status: { DRDY ERR } [68492.671148] ata3.00: error: { UNC } [68492.899657] ata3.00: configured for UDMA/133 [68492.899678] ata3: EH complete [68495.610841] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [68495.610851] ata3.00: BMDMA stat 0x24 [68495.610857] ata3.00: https://ubuntuforums.org/archive/index.php/t-1034762.html cmd c8/00:08:55:e8:8d/00:00:00:00:00/e2 tag 0 dma 4096 in [68495.610859] res 51/40:00:56:e8:8d/00:00:00:00:00/02 Emask 0x9 (media error) [68495.610863] ata3.00: status: { DRDY ERR } [68495.610865] ata3.00: error: { UNC } [68495.799599] ata3.00: configured for UDMA/133 [68495.799620] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [68495.799626] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [68495.799631] Descriptor sense data with sense descriptors (in hex): [68495.799633] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [68495.799643] 02 8d e8 56 [68495.799647] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [68495.799653] end_request: I/O error, dev sda, sector 42854486 [68495.799675] ata3: EH complete [68495.800096] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [68495.817023] sd 2:0:0:0: [sda] Write Protect is off [68495.817030] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [68495.819042] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [68495.826120] sd 2:0:0:0: [sda] 625142448 512-byte
clean. Screenshot instructions: Windows Mac Red Hat Linux Ubuntu Click URL instructions: Right-click on ad, choose "Copy Link", then paste here → (This may not be possible with some types https://sourceforge.net/p/smartmontools/mailman/message/21060273/ of ads) More information about our ad policies X You seem to have CSS turned off. Please don't fill out this field. You seem to have CSS turned off. Please don't fill out this field. Briefly describe the problem (required): Upload screenshot of ad (required): Select a file, or drag & drop file here. ✔ ✘ Please provide the ad click URL, if possible: drdy err Home Browse S.M.A.R.T. Monitoring Tools Mailing Lists S.M.A.R.T. Monitoring Tools Disk Inspection and Monitoring Brought to you by: ballen4705, chrfranke, dipohl Summary Files Reviews Support Wiki Mailing Lists News Code smartmontools-announce smartmontools-database smartmontools-support Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..) Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..) From: Alan Cox
be down. Please try the request again. Your cache administrator is webmaster. Generated Sat, 01 Oct 2016 13:56:42 GMT by s_hv1000 (squid/3.5.20)