Error Reading Temperature From Sys Class Hwmon
Contents |
anyone tried installing the latest version of lm-sensors (3.0.1) from the lm-sensors.org website? I checked in Package Manager and I have version 1:3.0.0-4ubuntu installed. I ran through sensors-detect and had
There Are No Pwm-capable Sensor Modules Installed
few signals detected. Makes me wonder if I'm missing something. slick_nickMay 2nd, 2008, 05:24 ubuntu fancontrol AMdeh1963, good job noticing that...my sensors seem to be working fine/detecting with the older ubuntu version , but I might go
Lm-sensors Devices
head and try the latest version tomorrow if I get the time :) Nameless_oneMay 14th, 2008, 10:33 AMHello. I installed lm-sensors following this howto (actually the updated info from page 24). I am trying to fancon linux read my graphics card's temperature. My sensors output is this: $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +40°C Core1 Temp: +40°C w83627ehf-isa-0290 Adapter: ISA adapter VCore: +1.42 V (min = +0.00 V, max = +1.74 V) in1: +9.40 V (min = +10.08 V, max = +6.71 V) ALARM AVCC: +3.36 V (min = +1.97 V, max = +4.05 V) 3VCC: +3.39 V (min = +0.45 V, max = +4.02 hwmon arch V) in4: +1.71 V (min = +1.90 V, max = +0.68 V) ALARM in5: +1.72 V (min = +1.78 V, max = +0.57 V) ALARM in6: +5.68 V (min = +3.23 V, max = +4.84 V) ALARM VSB: +3.36 V (min = +3.82 V, max = +2.90 V) ALARM VBAT: +0.00 V (min = +3.98 V, max = +3.50 V) ALARM in9: +1.54 V (min = +2.04 V, max = +2.04 V) ALARM Case Fan: 2250 RPM (min = 2909 RPM, div = 8) ALARM CPU Fan: 3013 RPM (min = 975 RPM, div = 8) Aux Fan: 0 RPM (min = 1506 RPM, div = 128) ALARM fan5: 0 RPM (min = 0 RPM, div = 128) Sys Temp: +31°C (high = +47°C, hyst = -1°C) CPU Temp: +39.0°C (high = +80.0°C, hyst = +75.0°C) AUX Temp: +39.0°C (high = +80.0°C, hyst = +75.0°C) Does anyone know whether any of these metrics corresponds to my GPU? dtrappMay 14th, 2008, 04:15 PMThis is also a noob question Can you tell me where the mkdev.sh file is - I installed lm-sensors but cannot find the file. Nameless_oneMay 17th, 2008, 11:39 AMIf you are running gutsy or later, I believe you don't need to run the mkdev.sh script. Check here (https://help.ubun
Sometimes it is useful to know the temperature of your hardware, to prevent it from frying. This
Pwmconfig
information can easily be found, if your hardware provides the sensors needed, i8kutils and we have the necessary software. Most computers come with temperature sensors, which can be used to prevent
Lm_sensors
your hardware from excessive heat. The most important thing to watch is, of course, your CPU temperature. This is where lm-sensors comes in. So, lets install it: # apt-get install lm-sensors https://ubuntuforums.org/archive/index.php/t-2780-p-2.html Please notice that lm-sensors needs a recent version of i2c, so your kernel must have it installed (either via a 2.6 kernel (debian's default kernel works), or a patch to your 2.4 kernel). Once we have it installed, we need to configure it. A tool, sensors-detect can be used, but first we must ensure the necessary files are created under /dev. If https://debian-administration.org/article/327/Monitoring_your_hardware's_temperature you have a static /dev, you must manually create them: # cd /dev && ./MAKEDEV i2c If you have a dynamic /dev, then you need to load the i2c-dev module (I have only dynamic /dev systems, so I don't know if this module needs to be loaded also on those systems). # modprobe i2c-dev After this, you can proceed with the configuration. # sensors-detect Follow the instructions, throughout the wizard. Finally, we need to load the modules sensors-detect told us that should be loaded. In my case, it was i2c-viapro, i2c-isa, eeprom and w83627hf. # modprobe -a i2c-viapro i2c-isa eeprom w83627hf After this, we should be able to read sensor information. Just run the sample sensors program shipped with lm-sensors, and watch all your sensors! Now, there may be problems with the output: Information given by the hardware must be translated, and sometimes the configuration file doesn't handle your chip nicely. Check with your CMOS hardware monitor (probably by rebooting) that the readings are correct, and if not, modify /etc/sensors.conf (this file is extensively self-documented). After you are done with /etc/sensors.conf, you c
Sign in Pricing Blog Support Search GitHub This repository Watch 116 Star 518 Fork 181 paradoxxxzero/gnome-shell-system-monitor-applet Code Issues 91 Pull requests 16 Projects 0 https://github.com/paradoxxxzero/gnome-shell-system-monitor-applet/issues/259 Wiki Pulse Graphs New issue Spamming system logs due to non-existent hwmon files #259 Open mgalgs opened this Issue Nov 25, 2014 · 12 comments Projects None yet Labels None yet Milestone No milestone Assignees No one assigned 10 participants mgalgs commented Nov 25, 2014 I get this in my system log every 5 minutes: Nov 25 error reading 11:02:14 mitchelh-linux gnome-session[814]: Gjs-Message: JS LOG: error reading: /sys/class/hwmon/hwmon1/fan1_input This makes it very difficult to read my system logs. I had a look at check_sensors but it looks like we're already bailing out if the files don't exist... So I'm not sure where the problem is. fhaust commented Dec 26, 2014 Second this: Dez 26 18:34:40 mobifaust gnome-session[1971]: Gjs-Message: JS LOG: error reading temperature error reading: /sys/class/hwmon/hwmon1/fan2_input Dez 26 18:34:45 mobifaust gnome-session[1971]: Gjs-Message: JS LOG: error reading: /sys/class/hwmon/hwmon1/fan2_input Dez 26 18:34:50 mobifaust gnome-session[1971]: Gjs-Message: JS LOG: error reading: /sys/class/hwmon/hwmon1/fan2_input Dez 26 18:34:55 mobifaust gnome-session[1971]: Gjs-Message: JS LOG: error reading: /sys/class/hwmon/hwmon1/fan2_input Hecke commented Jan 27, 2015 me too... though it is all 2-3 secs and freezes my system for a short time :-( Jan 27 09:06:39 arenal gnome-session[1440]: Gjs-Message: JS LOG: error reading: /sys/class/hwmon/hwmon1/temp1_input najamelan commented Feb 12, 2015 I have the same problem Collaborator darkxst commented Feb 12, 2015 this should been fixed by d04c136 tommybutler commented May 29, 2015 I'm running Debian Jessie, and compiling from source isn't really feasible. How, please tell me, how do I turn this off? What process needs to be killed or whatever? I can't just touch an empty file with that name into the sys filesystem to make the complaint go away... Please, seriously please tell me how to make it stop. Bandaids and duct tape fixes are perfectly acceptable for me. p91paul commented May 30, 2015 @tommybutler There is no "compiling from source" involved, javascr