Konica Minolta Communication Error Smb Server
Contents |
of the SMTP server?If the volume of one E-mail message exceeds the maximum capacity of the SMTP server for reception, an error occurs which will prevent transmission.Was the transmission procedure carried out correctly?Check the transmission procedure and then resend the fax.Are
Konica Minolta Scan Deleted Due To Error
the network settings and connection correct?Check the network settings and connection.For information on konica minolta server connection error scan email how to configure the network settings, refer to Here.Is the correct E-mail address set for this machine?Check the E-mail address of konica minolta scan to smb the machine and configure it.For information on how to configure the E-mail address setting, refer to Here. Are cables connected correctly?Make sure that the cables such as network and modular cables are correctly
Konica Minolta Smb Server Connection Error
connected.Are the fax number and address you entered for the destination correct?Were the address book destination and program destination registered correctly?If you are using a destination in the Address Book or Program, the fax number registered may be incorrect.Print the list of address book destinations to check that the numbers are registered correctly. For the procedure for printing the list of destinations, refer to Here.Is there a
Konica Minolta Scan To Folder Server Connection Error
problem with the receiving machine?Is the power of the receiving facsimile turned off, is it out of paper or is there another problem?Call the recipient or otherwise to determine whether there is a problem.Cannot receive faxes.Is the power turned on?Check the Main Power Switch of this machine.If a hub is used, also check the hub power.Has the machine been placed in the ErP Auto Power Off mode?If the machine is placed into the ErP Auto Power Off mode, it cannot receive any jobs. Press the Power key to release the ErP Auto Power Off mode.For the Erp Auto Power Off mode, refer to Here.Are cables connected correctly?Make sure that the cables such as network and modular cables are correctly connected.Is the memory full or does the hard disk lack sufficient available space?Check the remaining amount of memory or hard disk space. If there is insufficient memory or hard disk space, the machine will fail to receive faxes or, if it receives faxes, will fail to print them.Scanned data cannot be sent (by SMB transmission) to a specified computer.Is the folder correctly specified?A path for a destination folder containing "/ (slash)" is not valid. Use "\" to specify the path
client/Remote PanelWebService ScanDistributed scan server sendingBluetoothSingle Sign-OnLAN (IEEE802.1X)CodeDescription1Connection has already been established.2Setting error3Unable to find the destination AP konica minolta scan to email login error (SSID).4The authentication mode does not match the
Konica Minolta Error 107
AP (IEEE8021X/WPA-EAP/WPA-PSK/NONE).5Negotiation of the EAP method failed.6The EAP authentication failed (user ID, error deletion konica scan to smb password, certificate, etc.)7Encryption negotiation with the AP failed (TKIP/CCMP).8Failed to retrieve the client certificate.9The client certificate has expired.10Verification http://manuals.konicaminolta.eu/bizhub-C554-C454-C364-C284-C224/EN/contents/id16-0064.html error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).11Although the WPA-PSK mode is selected, the Pre-Shared Key is not specified.12An authentication error occurred in WPA-PSK mode (unmatched Pre-Shared Key).13The phase 2 method is not specified (PEAP).14Negotiation of the phase 2 method http://www.biz.konicaminolta.com/download/users-guide/754e_654e/en/contents/id16-_101308214.html failed (PEAP).15Response from the server has timed out.16Failed to allocate memory.17Failed to start the supplicant task.18The driver does not work.19The server certificate has expired (EAP-TLS/EAP-TTLS/PEAP).20CA verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).21Server ID verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).22The CA certificate is not specified (EAP-TLS/EAP-TTLS/PEAP).23The server ID is not specified (EAP-TLS/EAP-TTLS/PEAP).24Settings are combined normally.25Connection and authentication are complete.26The server certificate does not have the expected usage (EAP-TLS/EAP-TTLS/PEAP).27The server certificate has expired (EAP-TLS/EAP-TTLS/PEAP).28Access to the server to check for expiration of the server certificate is rejected (EAP-TLS/EAP-TTLS/PEAP).29Access to the server to check for expiration of the server certificate has timed out (EAP-TLS/EAP-TTLS/PEAP).30Unable to check for expiration because the CRL size that
Konica Minolta Konica Minolta Join the Community! Creating your account only takes a few minutes. Join Now Hi all, We installed a new Konica Minolta printer this spring (model number is bizhub C224e). The https://community.spiceworks.com/topic/528287-konica-minolta-model-bizhub-c224e-does-not-scan printer was scanning just fine until one day when the executive assistant reported that each time she scans a document, the error message "Failed to complete job" followed by an error code displays. The error message is the same for each scan, but the error code varies. We accessed the SMB settings in the Administrator Console of the printer and checked the Host address (Host name), File Path, User ID and Password. We made sure konica minolta there are no forward slashes in the host name. On the PC side, we checked the scan folder for share and security permissions. Everything is fine insofar as we can see. Yet this issue remains unresolved. Has anyone else experienced the same scan issue with a printer? If you did, how did you manage to resolve it? Any help is much appreciated. Thomas Reply Subscribe RELATED TOPICS: Konica Minolta Bizhub 363 Cannot Scan to konica minolta scan Folder Scan to email on Konica Minolta Bizhub C300 Question about Konica Minolta bizhub C654e   17 Replies Pimiento OP Gregory_ZA Jun 28, 2014 at 11:00 UTC Qualserv I.T. is an IT service provider. I experienced the same issue the other day on a clients network scans also using SMB what I did find was that password protected sharing was disabled under advanced sharing settings on the host PC. After enabling it scanning worked. 0 Sonora OP stephenbrown2 Jul 3, 2014 at 4:09 UTC When you look at the Job List, you should be able to select the job that gave the error and select Error Details. In that list you will see a reason for the error. You might see Login Error, Server Connect Error, or something else. Also, what OS are you scanning to? 1 Sonora OP BillWills Jul 3, 2014 at 4:13 UTC Thomas3697 wrote: Hi all, We installed a new Konica Minolta printer this spring (model number is bizhub C224e). The printer was scanning just fine until one day when the executive assistant reported that each time she scans a document, the error message "Failed to complete job" followed by an error code displays. The error message is the same for each scan, but the error code varies. We accessed