Konica Transmission Error
Contents |
client/Remote PanelWebService ScanDistributed scan server sendingBluetoothSingle Sign-OnLAN (IEEE802.1X)CodeDescription1Connection has already been established.2Setting error3Unable to find the destination AP (SSID).4The authentication mode does not match the AP (IEEE8021X/WPA-EAP/WPA-PSK/NONE).5Negotiation of konica minolta server connection error scan email the EAP method failed.6The EAP authentication failed (user ID,
Konica Minolta Scan To Email Error
password, certificate, etc.)7Encryption negotiation with the AP failed (TKIP/CCMP).8Failed to retrieve the client certificate.9The
Konica Minolta Scan Deleted Due To Error
client certificate has expired.10Verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).11Although the WPA-PSK mode is selected, the Pre-Shared Key is not specified.12An authentication error occurred
Konica Minolta Fax Error Codes
in WPA-PSK mode (unmatched Pre-Shared Key).13The phase 2 method is not specified (PEAP).14Negotiation of the phase 2 method failed (PEAP).15Response from the server has timed out.16Failed to allocate memory.17Failed to start the supplicant task.18The driver does not work.19The server certificate has expired (EAP-TLS/EAP-TTLS/PEAP).20CA verification error of the server konica minolta error 107 certificate (EAP-TLS/EAP-TTLS/PEAP).21Server ID verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).22The CA certificate is not specified (EAP-TLS/EAP-TTLS/PEAP).23The server ID is not specified (EAP-TLS/EAP-TTLS/PEAP).24Settings are combined normally.25Connection and authentication are complete.26The server certificate does not have the expected usage (EAP-TLS/EAP-TTLS/PEAP).27The server certificate has expired (EAP-TLS/EAP-TTLS/PEAP).28Access to the server to check for expiration of the server certificate is rejected (EAP-TLS/EAP-TTLS/PEAP).29Access to the server to check for expiration of the server certificate has timed out (EAP-TLS/EAP-TTLS/PEAP).30Unable to check for expiration because the CRL size that has been retrieved to check for the expiration of the server certificate exceeds the maximum capacity that can be retained (1MB) (EAP-TLS/EAP-TTLS/PEAP).31Incorrect format of the server certificate (EAP-TLS/EAP-TTLS/PEAP).32Verification of the server certificate is invalid (EAP-TLS/EAP-TTLS/PEAP).33The hard disk path is not specified for the certificate verification (PKI) function (EAP-TLS/EAP-TTLS/PEAP).34The certificate verification (PKI) function is in the excessive multiplex processing status (EAP-TLS/EAP-TTLS/P
of the SMTP server?If the volume of one E-mail message exceeds the maximum capacity of the SMTP server for reception, an error occurs which will prevent transmission.Was the transmission procedure carried out correctly?Check the transmission procedure and then resend the konica minolta scan to folder not working fax.Are the network settings and connection correct?Check the network settings and connection.For information konica minolta scan to email failed to complete job on how to configure the network settings, refer to Here.Is the correct E-mail address set for this machine?Check the E-mail konica minolta error deletion address of the machine and configure it.For information on how to configure the E-mail address setting, refer to Here. Are cables connected correctly?Make sure that the cables such as network and modular http://www.biz.konicaminolta.com/download/users-guide/754e_654e/en/contents/id16-_101308214.html cables are correctly connected.Are the fax number and address you entered for the destination correct?Were the address book destination and program destination registered correctly?If you are using a destination in the Address Book or Program, the fax number registered may be incorrect.Print the list of address book destinations to check that the numbers are registered correctly. For the procedure for printing the list of destinations, refer http://manuals.konicaminolta.eu/bizhub-C554-C454-C364-C284-C224/EN/contents/id16-0064.html to Here.Is there a problem with the receiving machine?Is the power of the receiving facsimile turned off, is it out of paper or is there another problem?Call the recipient or otherwise to determine whether there is a problem.Cannot receive faxes.Is the power turned on?Check the Main Power Switch of this machine.If a hub is used, also check the hub power.Has the machine been placed in the ErP Auto Power Off mode?If the machine is placed into the ErP Auto Power Off mode, it cannot receive any jobs. Press the Power key to release the ErP Auto Power Off mode.For the Erp Auto Power Off mode, refer to Here.Are cables connected correctly?Make sure that the cables such as network and modular cables are correctly connected.Is the memory full or does the hard disk lack sufficient available space?Check the remaining amount of memory or hard disk space. If there is insufficient memory or hard disk space, the machine will fail to receive faxes or, if it receives faxes, will fail to print them.Scanned data cannot be sent (by SMB transmission) to a specified computer.Is the folder correctly specified?A path for a destination folder containing "/ (slash)" is
& Send is a function that checks the specified fax number against http://manuals.konicaminolta.eu/bizhub-C658-C558-C458-C368-C308-C258-UD/EN/contents/sh5_18.html the destination fax number (CSI) and faxes only when the numbers match. This prevents misdirected transmissions since a transmission error occurs http://www.mytechtime.com/2011/12/smbftp-scan-errors-in-konica-minolta.html if the specified fax number and the remote fax number (CSI) do not match.Detailed ViewEntering a fax number twice (Confirm konica minolta Address (TX))This machine provides the function to have a user enter a fax number twice. By entering a fax number twice when sending a fax, you can prevent a fax from being sent to an incorrect destination.Detailed ViewEntering a fax number to konica minolta scan be registered twice (Confirm Address (Register))This machine provides the function to have a user enter a fax number twice. By entering a fax number twice when registering a fax destination, you can prevent a fax destination from being incorrectly registered.Detailed ViewSearch* Enter a keyword. You can search within the user's guide.Current position : Home>Security Enhancement>To prevent a fax transmission errorItem of the same category as for the current pageTo print highly confidential documentsTo prohibit unauthorized copying of printed materialsTo restrict the secondary copy of copied paperTo prevent divulging of information from a sent file To prevent a fax transmission error To prevent a received fax from being stolen or lostEnhancing network communication securityTo restrict users of this machineLink to page for each functionHomePrintScanFaxNetwork FaxPC-FAXCopyBox
print a transmission report (TX report) to show the document number, start date, destination and transmission result etc. According to the factory settings, the machine is set to automatically print a report after a specific number of jobs (usually 50) have been done. If you are getting a "communication error" message, you can also print transmission report to diagnose the problem. To do this, press [Utility] key, touch [Reports], touch [TX Report]. The transmission report is printed. You can find the result under "Results" column. Any of the following may appear here:OK: The transmission was completely successful.INTERR: The transmission was interrupted.F.MEM: The memory capacity was exceeded.NG: The transmission failed.PT.DEL: The transmission to some destinations failed.F.DATA: The size of the data exceeds the allowable limit.IMG NG: The transmission resolution was incorrect so the transmission was ended.Error Codes: When an error code is displayed, troubleshoot the problem as described below:ED09C6:The LAN cable is not connected, or the destination address in incorrect. Check that the LAN cable is correctly connected. Also, check that the settings for the destination address and port number are correctly specified. If you are using Scan to FTP, check that the settings for the FTP server address, port number, and proxy server are correctly specified.ED09C7The user name or password is incorrect. Make sure that you entered correct user name and password to access the destination folder. ED09C8The specified folder doesn't exist. Check that the save destination folder exists and properly shared on the network.ED09C9The disk capacity is full. Free up the disk space on the corresponding disk.ED09CFThe protocol is incorrect. Ask the administrator to deactivate the protocol usage restriction, or look for other delivery methods, or look for other d