Error Propagation Of A Product
Contents |
or more quantities, each with their individual uncertainties, and then combine the information from these quantities in order to come up with a final result of our experiment. How can you state your answer for the combined result of these measurements and their uncertainties scientifically? The answer to this fairly common question depends on how the individual measurements
Error Propagation Calculator
are combined in the result. We will treat each case separately: Addition of measured quantities If you have error propagation product rule measured values for the quantities X, Y, and Z, with uncertainties dX, dY, and dZ, and your final result, R, is the sum or difference of these error propagation sum quantities, then the uncertainty dR is: Here the upper equation is an approximation that can also serve as an upper bound for the error. Please note that the rule is the same for addition and subtraction of quantities. Example: Suppose we have measured
How To Find Error Propagation
the starting position as x1 = 9.3+-0.2 m and the finishing position as x2 = 14.4+-0.3 m. Then the displacement is: Dx = x2-x1 = 14.4 m - 9.3 m = 5.1 m and the error in the displacement is: (0.22 + 0.32)1/2 m = 0.36 m Multiplication of measured quantities In the same way as for sums and differences, we can also state the result for the case of multiplication and division: Again the upper line is an approximation and the lower line is the exact result for
Error Propagation Example
independent random uncertainties in the individual variables. And again please note that for the purpose of error calculation there is no difference between multiplication and division. Example: We have measured a displacement of x = 5.1+-0.4 m during a time of t = 0.4+-0.1 s. What is the average velocity and the error in the average velocity? v = x / t = 5.1 m / 0.4 s = 12.75 m/s and the uncertainty in the velocity is: dv = |v| [ (dx/x)2 + (dt/t)2 ]1/2 = 12.75 m/s [(0.4/5.1)2 + (0.1/0.4)2]1/2 = 3.34 m/s Multiplication with a constant What if you have measured the uncertainty in an observable X, and you need to multiply it with a constant that is known exactly? What is the error then? This is easy: just multiply the error in X with the absolute value of the constant, and this will give you the error in R: If you compare this to the above rule for multiplication of two quantities, you see that this is just the special case of that rule for the uncertainty in c, dc = 0. Example: If an object is realeased from rest and is in free fall, and if you measure the velocity of this object at some point to be v = - 3.8+-0.3 m/s, how long has it been in free fall? Answer: we can calculate the time as (g = 9.81 m/s2 is assumed to be known exactly) t = - v / g = 3.8 m/s / 9.81 m/s2 = 0.387 s The uncertainty in the fall t
propagation of error) is the effect of variables' uncertainties (or errors, more specifically random errors) on the uncertainty of a function based on them. When the variables are the values of experimental measurements error propagation division they have uncertainties due to measurement limitations (e.g., instrument precision) which propagate to
Error Propagation Physics
the combination of variables in the function. The uncertainty u can be expressed in a number of ways. It error propagation calculus may be defined by the absolute error Δx. Uncertainties can also be defined by the relative error (Δx)/x, which is usually written as a percentage. Most commonly, the uncertainty on a quantity http://lectureonline.cl.msu.edu/~mmp/labs/error/e2.htm is quantified in terms of the standard deviation, σ, the positive square root of variance, σ2. The value of a quantity and its error are then expressed as an interval x ± u. If the statistical probability distribution of the variable is known or can be assumed, it is possible to derive confidence limits to describe the region within which the true value of the https://en.wikipedia.org/wiki/Propagation_of_uncertainty variable may be found. For example, the 68% confidence limits for a one-dimensional variable belonging to a normal distribution are ± one standard deviation from the value, that is, there is approximately a 68% probability that the true value lies in the region x ± σ. If the uncertainties are correlated then covariance must be taken into account. Correlation can arise from two different sources. First, the measurement errors may be correlated. Second, when the underlying values are correlated across a population, the uncertainties in the group averages will be correlated.[1] Contents 1 Linear combinations 2 Non-linear combinations 2.1 Simplification 2.2 Example 2.3 Caveats and warnings 2.3.1 Reciprocal 2.3.2 Shifted reciprocal 3 Example formulas 4 Example calculations 4.1 Inverse tangent function 4.2 Resistance measurement 5 See also 6 References 7 Further reading 8 External links Linear combinations[edit] Let { f k ( x 1 , x 2 , … , x n ) } {\displaystyle \ ρ 5(x_ ρ 4,x_ ρ 3,\dots ,x_ ρ 2)\}} be a set of m functions which are linear combinations of n {\displaystyle n} variables x 1 , x 2 , … , x n {\displays
uncertainty of an answer obtained from a calculation. Every time data are measured, there is an uncertainty associated with that measurement. (Refer to guide to http://physics.appstate.edu/undergraduate-programs/laboratory/resources/error-propagation Measurement and Uncertainty.) If these measurements used in your calculation have http://www.itl.nist.gov/div898/handbook/mpc/section5/mpc55.htm some uncertainty associated with them, then the final answer will, of course, have some level of uncertainty. For instance, in lab you might measure an object's position at different times in order to find the object's average velocity. Since both distance and time measurements have uncertainties associated error propagation with them, those uncertainties follow the numbers throughout the calculations and eventually affect your final answer for the velocity of that object. How would you determine the uncertainty in your calculated values? In lab, graphs are often used where LoggerPro software calculates uncertainties in slope and intercept values for you. In other classes, like chemistry, there are particular ways error propagation of to calculate uncertainties. In fact, since uncertainty calculations are based on statistics, there are as many different ways to determine uncertainties as there are statistical methods. The error propagation methods presented in this guide are a set of general rules that will be consistently used for all levels of physics classes in this department. In the following examples: q is the result of a mathematical operation δ is the uncertainty associated with a measurement. For example, if you have a measurement that looks like this: m = 20.4 kg ±0.2 kg Thenq = 20.4 kg and δm = 0.2 kg First Step: Make sure that your units are consistent Make sure that you are using SI units and that they are consistent. If you are converting between unit systems, then you are probably multiplying your value by a constant. Please see the following rule on how to use constants. Logger Pro If you are using a curve fit generated by Logger Pro, please use the uncertainty associated with the parameters that Logger Pro give y
The approach to uncertainty analysis that has been followed up to this point in the discussion has been what is called a top-down approach. Uncertainty components are estimated from direct repetitions of the measurement result. To contrast this with a propagation of error approach, consider the simple example where we estimate the area of a rectangle from replicate measurements of length and width. The area $$ area = length \cdot width $$ can be computed from each replicate. The standard deviation of the reported area is estimated directly from the replicates of area. Advantages of top-down approach This approach has the following advantages: proper treatment of covariances between measurements of length and width proper treatment of unsuspected sources of error that would emerge if measurements covered a range of operating conditions and a sufficiently long time period independence from propagation of error model Propagation of error approach combines estimates from individual auxiliary measurements The formal propagation of error approach is to compute: standard deviation from the length measurements standard deviation from the width measurements and combine the two into a standard deviation for area using the approximation for products of two variables (ignoring a possible covariance between length and width), $$ s_{area} = \sqrt{width^2 \cdot s_{length}^2 + length^2 \cdot s_{width}^2} $$ Exact formula Goodman (1960) derived an exact formula for the variance between two products. Given two random variables, \(x\) and \(y\) (correspond to width and length in the above approximate formula), the exact formula for the variance is: $$ V(\bar{x} \bar{y}) = \frac{1}{n} \left[ X^2 V(y) + Y^2 V(x) + 2XYE_{11} + 2X\frac{E_{12}}{n} + 2Y\frac{E_{21}}{n} + \frac{V(x) V(y)}{n} + \frac{Cov((\Delta x)^2, (\Delta y)^2) -E_{11}^2 }{n^2} \right] $$ with \(X = E(x)\) and \(Y = E(y)\) (corresponds to width and length, respectively, in the approximate formula) \(V(x)\) is the variance of \(x\) and \(V(y)\) is the variance \(y\) (correspond