Internal Error Cpu 1 Fault Ibm Blade
Contents |
Error Code = IMM events displayed by AMM (for example, Service Advisor, AMM web interface) Event ID = IMM events displayed by DSA diagnostic program (for example, in the Chassis Event Log section) Follow the system board, voltage (planar fault) critical suggested actions in the order in which they are listed in the Action
System Board (planar Vbat) Voltage Under Critical Threshold
column until the problem is solved. See Parts listing to determine which components are consumable, structural, or CRU parts. If an
A Uncorrectable Bus Error Has Occurred On System
action step is preceded by "(Trained technician only)," that step must be performed only by a trained technician. Error Code Event ID Type Error Message Action 0x80010000 80010002-0701ffff Warning System board (CMOS battery) voltage under
Correctable Ecc Memory Error Logging Limit Reached
warning threshold. with chassis Reading: X, Threshold: Y If the machine has been recently installed, moved, or serviced, ensure the system battery is properly seated, and the system battery polarity is correct. Replace the system battery (see Removing the battery and Installing the battery). 0x80010200 80010202-0701ffff Error System board (CMOS battery) voltage under critical threshold. Reading: X, Threshold: Y Remove all expansion cards from the blade server (see Removing an fault in slot all pci error on system I/O expansion card). Remove all storage drives from the blade server (see Removing a hot-swap storage drive). If the error still occurs, replace the system-board assembly (see Removing the system-board assembly and Installing the system-board assembly). 0x80010200 80010202-0701ffff Error System board (SysBrd 5V) voltage under critical threshold. with chassis Reading: X, Threshold: Y Remove all expansion cards from the blade server (see Removing an I/O expansion card). Remove all storage drives from the blade server (see Removing a hot-swap storage drive). If the error still occurs, replace the system-board assembly (see Removing the system-board assembly and Installing the system-board assembly). 0x80010200 80010202-0701ffff Error System board (SysBrd 12V) voltage under critical threshold. with chassis Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events (see Event logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If other modules or blades are logging the same issue then check the power supply for the BladeCenter unit. If the error still occurs, replace the system-board assembly (see Removing the system-board assembly and Installing the system-board assembly
are available on the IBM Web site at http://www.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5079338&brandind=5000008. Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. See Parts listing problem determination and service guide hs22 to determine which components are CRUs and which components are FRUs. If an action h21455 step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error sensor planar fault has transitioned to critical from a less severe state Code Event ID Type Error Message Action 0x80010200 80010202-1002xxxx Error Expansion Module 1 (BPE3 12V Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, https://publib.boulder.ibm.com/infocenter/bladectr/documentation/topic/com.ibm.bladecenter.hs23.doc/IMM_error_messages.html look for other events in the IMM event log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If other modules or blades are logging the same issue then check the system power supply, otherwise replace the Blade PCI Express I/O expansion unit. See https://publib.boulder.ibm.com/infocenter/bladectr/documentation/topic/com.ibm.bladecenter.hs22.doc/dw1iv_r_IMM_error_messages.html Removing an optional expansion unit and Installing an optional expansion unit. 0x80010200 80010202-1002xxxx Error Expansion Module 1 (BPE3 12VSB Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If other modules or blades are logging the same issue; then, check the power supply for the BladeCenter unit. If the base blade is not logging a power issue; then, replace the Blade PCI Express I/O expansion unit. See Removing an optional expansion unit and Installing an optional expansion unit. 0x80010200 80010202-1002xxxx Error Expansion Module 1 (BPE3 3.3V Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If the base blade is n
are available on the IBM website at http://www.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5079338&brandind=5000008. Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. See Parts listing, Types 7871 and 1949 to https://publib.boulder.ibm.com/infocenter/bladectr/documentation/topic/com.ibm.bladecenter.hs22v.doc/dw1ir_r_IMM_error_messages.html determine which components are CRUs and which components are FRUs. If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error Code Type Error http://www.intel.com/content/www/us/en/support/boards-and-kits/000006043.html Message Action 0x80010200 Error Expansion Module 1 (BPE3 12V Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the IMM event system board log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If other modules or blades are logging the same issue then check the system power supply, otherwise replace the Blade PCI Express I/O expansion unit. See Removing an optional expansion unit and Installing an optional expansion unit. 0x80010200 internal error cpu Error Expansion Module 1 (BPE3 12VSB Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If other modules or blades are logging the same issue; then, check the power supply for the BladeCenter unit. If the base blade is not logging a power issue; then, replace the Blade PCI Express I/O expansion unit. See Removing an optional expansion unit and Installing an optional expansion unit. 0x80010200 Error Expansion Module 1 (BPE3 3.3V Sense) voltage under critical threshold. Reading: X, Threshold: Y If the under voltage problem is occurring on all blade servers, look for other events in the log related to power and resolve those events (see Error logs). View the event log provided by the advanced management module for your BladeCenter unit and resolve any power related errors that might be displayed. If the base blade is not logging a power issue; then, replace the Blade PCI Express I/O expansion unit. See Removing an optional expansion unit and Installing an optional expansion unit. 0x8001
in here. The browser version you are using is not recommended for this site.Please consider upgrading to the latest version of your browser by clicking one of the following links. Safari Chrome IE Firefox Support Navigation Support Support Home Drivers and Software Product Specifications Warranty Warranty Center Track Warranty Status Submit a Warranty Request Support Community Contact Us Support by Product Boards and Kits Education Emerging Technologies Graphics Drivers Network and I/O Processors Server Products Services Software Solid State Drives Technologies Wireless Networking Other Intel Products Identify My Product Support Support Home Intel® Boards and Kits How to Recover from an IERR for Intel® Server Boards Last Reviewed: 07-Oct-2016 Article ID: 000006043 An IERR is a Processor Internal Error. This erroris a signal that indicates a processor unrecoverable error or even a non-CPU event, such as a system BUS interruption or a memory can start this signal.On the Intel Server Boards listed at the bottom of this page, a Processor IERR can be confirmed or discarded from the Basic Input Output System (BIOS) Setup Utility under Advanced > Processor Configuration > CPU Retest.The IERR Filtering Algorithm helps to determine if the IERR signal came from a false CPU internal error or from another hardware source. This filtering algorithm helps youpreventunnecessary processor replacements. At the same time, thisalgorithmhelps you to isolate IERR events. If the IERR returns after the CPU Retest, the IERR signal most likely came from the CPU itself. If you have more than one processor installed, check the System Event Log (SEL) to find out which processor is generating the IERR.In some cases a system restart can also eliminate an IERR. However,if the problem persists: Try to boot up the system with one processor at the time Test another processor if possible. Remove and reinstall the memory.
This article applies to: Intel® Server Board S5000PALR Intel® Server Board S5000PAL Intel® Server Board S5000XALR Intel® Server Board S5000PSLROMBR Intel® Server Board S5000PSLSASR Intel® Server Board S5000PSLSATAR Intel® Server Board S5000PSLSATA Intel® Server Board S5400SF Intel® Server Board S5000VCL Intel® Server Board S5000VSA4DIMMR Intel® Server Board S5000VSASASR Intel® Server Board S5000VSASATAR Intel® Server Board