Read Error Encountered Sector 0 Disk
Contents |
Gaming Smartphones Tablets Windows 8 PSUs Android Your question Get the answer Tom's Hardware>Forum>Storage>Solution for "A disk read error occurred."> Closed Solution for "A disk read error occurred." Tags: Hard a disk read error occurred fix Drives Disk Read Error Storage Last response: 2 April 2011 22:05 in Storage a disk read error occurred press ctrl+alt+del to restart Share pbarney 17 June 2009 22:13:43 This is one of the most frustrating error messages you can ever deal a disk read error occurred windows 7 with. Sometimes the fix is simple, sometimes it's a complete pain. Having recently dealt with this again, I thought I'd post my thoughts in the hopes that it helps someone else out
Disk Read Error Windows 7
there. So you receive the dreaded "a disk read error occurred. Press Ctrl+Alt+Del to restart". Multiple restarts result in the same error message. If you put your drive into another computer, or connecting it as a slave on your own computer, it will typically work fine, and no data is missing. Because this error is not usually associated with data loss, DO NOT disk read error windows 10 RE-PARTITION THE DRIVE. Your data is likely safe and sound. Here's how we'll recover your data. Try each step below, in order, and see if your drive becomes accessible after each step. In my experience, you won't start seeing results until step 5 or so. 1. Run CHKDSK /R /P from the recovery console (it will typically find no error) 2. run FIXBOOT from recovery console (typically has no result) 3. run FIXMBR from recovery console (typically has no result) 4. Run the manufacturer's diagnostic utility, downloaded from their website (it will typically find no error) 5. Changing the drives from cable select to Master/Slave may fix it. 6. Replacing the data cable may fix it, but usually not. 7. Setting the BIOS to use defaults may fix it, but usually not. 8. Changing the BIOS drive settings from auto to user-specified, ensuring that LBA is selected may fix it. 9. Pulling the CMOS battery to let the BIOS lose it settings may work. At this point, you may be feeling some frustration. :-) If all that fails, here's what will usually work: Ghost your data to a n
here for a quick overview of the site Help Center Detailed answers to any questions you might have Meta Discuss the workings and policies of this site About Us Learn more about Stack Overflow the company Business Learn a disk read error occurred windows 10 more about hiring developers or posting ads with us Super User Questions Tags Users Badges
A Disk Read Error Occurred Press Ctrl+alt+del To Restart Windows 7
Unanswered Ask Question _ Super User is a question and answer site for computer enthusiasts and power users. Join them; it only takes
A Disk Read Error Occurred Laptop
a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the top Has anyone encountered this error? read error on /dev/sdc - cannot http://www.tomshardware.com/forum/250364-32-solution-disk-read-error-occurred read sector 0? up vote 1 down vote favorite /dev/sdc: read failed after 0 of 1024 at 0: Input/output error /dev/sdc: read failed after 0 of 1024 at 2499819012096: Input/output error /dev/sdc: read failed after 0 of 1024 at 2499819130880: Input/output error /dev/sdc: read failed after 0 of 1024 at 4096: Input/output error /dev/sdd: read failed after 0 of 1024 at 0: Input/output error /dev/sdd: read failed after 0 of 1024 at 2499819012096: Input/output error /dev/sdd: read http://superuser.com/questions/714728/has-anyone-encountered-this-error-read-error-on-dev-sdc-cannot-read-sector-0 failed after 0 of 1024 at 2499819130880: Input/output error /dev/sdd: read failed after 0 of 1024 at 4096: Input/output error /dev/sde: read failed after 0 of 1024 at 0: Input/output error I can create pvs, lvms, and vgs, but this always appears, can anyone please help me? thanks in advance linux partitioning centos lvm sas share|improve this question asked Feb 10 '14 at 8:36 Gino 63 add a comment| 2 Answers 2 active oldest votes up vote 1 down vote I would say that you probably have a physical disk error. You need to run some disk checking tools. The one I use is quite expensive I'm afraid but can recover most errors that can be recovered. It is Spinrite. share|improve this answer answered Feb 10 '14 at 8:49 Julian Knight 11.1k11026 it it ok to wipeout the disks clean then try to map it again? or do i really need to recover it? –Gino Feb 11 '14 at 2:26 You can wipe the disks if you don't need the data on them. Most likely that will get rid of the error. Most such errors are transitory. –Julian Knight Feb 11 '14 at 8:12 ok ill do that 1st, then will make a follow up after, thanks a lot for the reply :) –Gino Feb 11 '14 at 9:41
panel Disk read option - real-time settings adjustment The runtime control panel can be used to adjust disk I/O settings "on the fly". This is useful when processing a drive with bad sectors. All the changes made to the http://www.z-a-recovery.com/manual/runtime-control.aspx configuration are in effect for the next I/O operation (i.e. "immediately" for most conditions). Recommended settings For a good disk (no bad sectors) "Timeout" - set to 1000 ms. "Retry attempts" - set to "No retries". "Avoid repeated retries" - enable. "Skip factor" - set to 1. For a disk with bad sectors "Timeout" - set to 200 ms unless doing RAID recovery. For a RAID recovery, set to 500. "Retry attempts" read error - set to 1 unless the analysis is unacceptably slow. To increase speed, set to 0. "Avoid repeated retries" - enable. "Skip factor" - set to 32, unless the analysis is unacceptably slow. To increase speed, gradually increase "Skip factor" until satisfactory speed is achieved. "Force bus reset" should be disabled in most applications, even on a disk with bad sectors. Timeout Controls the amount of time to wait before deciding that a disk read error sector is bad. Sometimes a disk device driver does not provide a proper response about read operation status, so any read operation that takes longer than the specified amount of time is considered failed. Note that running some I/O-consuming tasks in the background may result in requests to good sectors exceeding this limit, causing some erroneous markings. The default setting of 1000 ms should fit for most cases when there is no physical damage on the disk. If the disk is physically damaged and scanning it takes a very long time, try decreasing this parameter down to 100 or 200 ms - this should give a significant speed boost. Retry attempts This setting controls amount of the additional read attempts once a bad sector is encountered. If set to "No retries", only one attempt will be made (i.e. the first one fails and then no retries). If "Avoid repeated retries" is set, the additional reads will only be attempted during a first encounter with the particular bad spot. During subsequent encounters, if any, the read error status will be indicated without ever attempting to read the sector. Avoid repeated retries If enabled, bad sectors are remembered and subsequent attempts to access the sector already listed as bad return failure without actually accessing the disk. This provides