Error 0021 Xbox 360 Slim
Contents |
E09/0021 Bridged solderjoint/Short - GPU/Southbridge Add / Edit Details Primary Error code: 3 RLOD E-Code xbox 360 slim erro 0021 / Secondary Error code:E09 (No Audio/Video) / 0021 Binary/Hex:00001001 / 0x09 -> error 0100 xbox 360 slim 9 Known fixes: 1)If you worked on the mainboard recently(soldered or so) remove these wires because you might error e68 xbox 360 slim be drawing too much power from the Southbridge Also look for missing/bridged components like capacitors/resistors 2) X-Clamp replacement 3) Southbridge X-Clamp-Fix 4) Reflow the Southbridge/Ethernet chip area 5) Reball the error 0101 xbox 360 slim Southbridge - bridged solder 6) if you work in dumping lite-on 8xxxx and 9xxxx with jumper, Check your dvd drive pcb (board) again, if there's still some shorting. 7) Wrong GPU model (e.g. Zephyr/Falcon GPU reballed onto a Xenon board). Related Errors:Powered by Xbox-experts.com 1021 Description: This error is caused by a bridged solder joint under GPU or Southbridge.
Xbox 360 Slim Error Codes
It can also be power related(the Southbridge isnt getting enough power). Can also be a component that is missing or damaged so look for missing and bridged parts(caps etc) near the Southbridge References: No References available! Clicks:137110 Share(BBCode): [b]Details for Error code E09/0021[/b] [b]Description:[/b] This error is caused by a bridged solder joint under GPU or Southbridge. It can also be power related(the Southbridge isnt getting enough power). Can also be a component that is missing or damaged so look for missing and bridged parts(caps etc) near the Southbridge [b]Fixes:[/b] 1)If you worked on the mainboard recently(soldered or so) remove these wires because you might be drawing too much power from the Southbridge Also look for missing/bridged components like capacitors/resistors 2) [url=http://xbox-experts.com/tutorial/team-hybrids-ultimate-xclamp-fix-released/]X-Clamp replacement[/url] 3) [url=http://xbox-experts.com/tutorial/southbridge-xclampfix/]Southbridge X-Clamp-Fix[/url] 4) [url=http://xbox-experts.com/tutorial/all-about-reflowing-heatgunning-building-a-custom-bga-rework-station-oven-reflow-flux-usage-etc/]Reflow the Southbridge/Ethernet chip area[/url] 5) Reball the Southbridge - bridged solder 6) if you work in dumping lite-on 8xxxx and 9xxxx with jumper, Check your dvd drive pcb (board) again, if there's still some shorting. 7) Wrong GPU model (e.g. Zephyr/Falcon GPU reballed onto a Xenon board). [b]Source[/b]: [url=http
Close × Menu Repair Guides Answers Forum Parts & Tools Store Teardowns Translate Join Log In GO iFixit Fast Order Create a Page Edit Billing Info Order History Logout Join Log In Repair Guides Answers Forum Parts &
Xbox 360 Error Code 0021
Tools Store Teardowns Translate « Back to Answers Index 153561 Xbox 360 The Xbox error 0021 garena 360 is the second game console made by Microsoft, and was released November 22, 2005. error codes red ring of +21 death 360 Questions View all Question Closed shinobimaster94 Rep: 1 Posted: 12/15/2013 Options Permalink History Subscribe Unsubscribe How to fix 0021 error code? I've installed the iFixit Red Ring of Death fix kit, but https://xbox-experts.com/errorcode/E09/0021/ I still got the 0021 secondary error code. Followed the instructions on iFixit and reflowed the motherboard with a heat gun twice, but with no success as well. Here's the link to the description of the error code: http://www.xbox-experts.com/errorcode/E0... Also, when I turn on my Xbox 360, there's a sound that comes from the disk drive. Kinda sounds like a drill from a dentist's office, but only https://www.ifixit.com/Answers/View/153561/How+to+fix+0021+error+code lower pitched. The 3 Red Rings soon follow. According to the link above, the problem may be because of a "...bridged solder joint under GPU or Southbridge...", "...power related...", or "...missing components. " This is my first time trying to fix an Xbox so I'm not sure what a "southbridge" is. To my understanding the only way to fix a bridged solder joint is to reball it and I heard it's pretty costly. Other than that, how could I test if the error code is power related or due to missing components and if either one are the cause, how, if possible, would I fix it? Also, if you suggest reflowing the board, what would be the next option besides using a heat gun (something that I could do at home perhaps)? Thanks! Answer this question I have this problem too Subscribed to new answers Is this a good question? Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz? Cancel View Statistics: Past 24 Hours: 2 Past 7 Days: 7 Past 30 Days: 33 All Time: 1,341 22,163 Free Manuals 86,520 Solutions 6,382 Devices iFixit About
to bring up search and write in your error code. Took me forever to write up and get sorted so i hope you appreciate it [/b][/size] Quicklist of error https://community.wemod.com/t/xbox-360-error-code-guide-known-fixes-and-descriptions-to-all-errors/384 codes: [b]Ecode's[/b] E00 E01 E02 E03 E04 E08 E09 E10 E11 E12 E13 E14 E15 http://www.se7ensins.com/forums/threads/error-code-0021.798733/ E16 E17 E18 E19 E20 E21 E22 E23 E24 E25 E27 E28 E29 E30 E31 E32 E33 E34 E35 E36 E37 E38 E39 E40 E41 E42 E43 E44 E45 E46 E47 E56 E57 E58 E59 E60 E61 E62 E63 E26 E48 E49 E50 E51 E52 E53 E54 E55 E64 E65 E66 E67 E68 E69 E70 E71 E72 xbox 360 E73 E74 E75 E76 E77 E78 E79 E80 [b]Secondary's[/b] 0000 0001 0002 0003 0010 0011 0012 0013 0020 0021 0022 0023 0030 0031 0032 0033 0100 0111 0112 0113 0120 0121 0122 0123 0130 0131 0132 0133 0200 0201 0202 0203 0210 0211 0212 0213 0220 0221 0222 0223 0230 0231 0232 0233 0300 0301 0302 0303 0310 0311 0312 0313 0320 0321 0322 0323 0330 0331 0332 0333 1000 1001 1002 1003 xbox 360 slim 1010 1011 1012 1013 1020 1021 1022 1023 1030 1031 1032 1033 1100 4444 [u][/u] 0 RLOD Error (normal) codes [b][/b] E-Code / Secondary Error code: E26 / 0122Binary/Hex: 00011010 / 0x1A -> 26 Known fixes: 1) Apply new thermal paste, make sure the heatink is making contact with the heat spreader Description: This is the overheating code for the Xbox 360 slim for the CPU/GPU unit. "I overheated my 360 and when it overheated the airflow temp was a 69C.Also you get the seccondary error codes the same way as a regular 360.Also it has green leds not red lol.And differant error codes 0122 is now the new overheating code.vid: http://www.youtube.com/watch?v=j6zc_knTszQ" E-Code / Secondary Error code: - (No Audio/Video) / -Binary/Hex: 00000000 / 0x00 -> 0 Known fixes: 1) X-Clamp replacement - tighten the screws on the side facing the HANA chip slightly more2) Reflow GPU and HANA chip Related Errors: E74 Description: This error is caused by a cold solder joint in the GPU - HANA chip area, like E74.The 360 doesnt recognize it yet though. E-Code / Secondary Error code: - (No Audio/Video) / -Binary/Hex: 00000000 / 0x00 -> 0 Known fixes: 1) Scan the mainboard and make sure that there is nothing that might short something out, like metal chipping, component
14 replies and 2,652 views. Str8UpWhite64 Seasoned Member Messages: 1,137 Ratings: 176 Oct 14, 2012 #1 I have acquired a large number of xboxes in the past few years. I am now looking at the rgh hack and am going to try to perform it with y brother later this week. When testing all the xboxes, one that had red rings no longer has them and one that didn't now does. It is giving me error 0021, which I checked the guide and it says either DVD drive timeout or cold a solder somewhere to the gpu. I assume its the second one because I don't have a DVD drive hooked in and it still gives me the error. I tried all (4) of them without DVD drives and all work fine, excluding this one. So my question is, how would I go about fixing this issue? Str8UpWhite64, Oct 14, 2012 Str8UpWhite64, Oct 14, 2012 #1 The Coon 360 Support Stoner ~ That High Guy Premium Messages: 2,796 Ratings: 854 Oct 14, 2012 #2 Str8UpWhite64 said: ↑ I have acquired a large number of xboxes in the past few years. I am now looking at the rgh hack and am going to try to perform it with y brother later this week. When testing all the xboxes, one that had red rings no longer has them and one that didn't now does. It is giving me error 0021, which I checked the guide and it says either DVD drive timeout or cold a solder somewhere to the gpu. I assume its the second one because I don't have a DVD drive hooked in and it still gives me the error. I tried all (4) of them without DVD drives and all work fine, excluding this one. So my question is, how would I go about fixing this issue?Click to expand... Reflow the Southbridge/Ethernet chip area. Or reball the south bridge. or if you work in dumping lite-on 8xxxx and 9xxxx with jumper, Check your dvd drive pcb (board) again, if there's still some shorting. The Coon, Oct 14, 2012 Th