Dell Printer 050 Error
Contents |
Stuck Paper Check the Registration and Exit Sensors Fit Known Good Paper Tray or Swap Separator Roller Reseat or Fit Known Good Transfer Belt, Transfer Roller and Fuser This article provides information on "How to Troubleshoot Paper Jam Error 050-101 or 050-121 on the 5130cdn Dell Laser Printer" Clear 050-121 xerox Stuck Paper Open the right hand side cover. Remove any paper remaining in this area. Restart the dell c3765dnf paper jam error printer with all data cables (Ethernet, USB, Parallel) disconnected. If the error occurs on POST before any attempt to print is made go to step dell c3760dn paper jam 050-121 2. If the printer completes it's Power On Self Test and displays "Ready to Print" but the issue returns when printing go to step 3. More info can be found in the 5130cdn User’s Guide. Back to Top Check the Registration
Xerox 6605 050-121
and Exit Sensors Open the right hand side cover. Locate the registration sensor. Ensure there is no stuck paper or physical damage. Manually toggle the sensor actuator, ensure it moves freely and returns to it's original position when released. Locate the exit sensor. Ensure there is no stuck paper or physical damage. Manually toggle the sensor actuator, ensure it moves freely and returns to it's original position when released. Restart the printer. If the error still occurs on POST fit a new dell c3760dn service manual or known good fuser unit if available or contact Dell Technical Support. More info can be found in the 5130cdn User’s Guide. Back to Top Fit Known Good Paper Tray or Swap Separator Roller If a known good tray from a working printer is available fit this to the printer and test. If no sub tray is available remove tray 1. Hinge the separator roller cover to the left to open it, and then hold the cover open. Hinge the separator roller cartridge to the right. Slide the separator roller caddy towards the front of the tray. Lift at the rear to disengage from mounting hole 1, then remove fully from mounting hole 2. With the separator roller caddy removed locate the black plastic hook holding the separator roller axle in place. Gently bend the black plastic hook clear of the axle's end. Then disengage the axle. With the axle fully removed from the caddy, gently bend the blue plastic retention clip away from the the black plastic axle. Then slide the blue plastic sleeve off the axle completely. Locate the pickup rollers in the printer chassis, turn the left roller until the retention clip is visible. Gently bend the blue plastic retention clip away from the axle, then slide the roller forward to remove. Clean both rollers with a damp cloth. Follow the previous steps in reverse to refit the rollers but swap the position the rollers are installed in. Fit the roller taken fro
by User Yes No 1 Verify that Tray 1 is installed properly Reseat the Tray 1 Does the error persist during printing? Got to Step 2 End of work 2 Check the paper path Note: Pieces of paper can be dell c3765dnf service manual difficult to see, tilt the printer back and look in the chute assembly located
Dell C3760dn Paper Jam Tray 1
just above the paper tray. Remove the foreign objects, or pieces of paper, etc. Does the error persist during printing? Go to
Dell 5130cdn
step 3 End of work 3 Check Paper Type Does the paper meet the specifications? (Refer to the specific models User's Guide under Print Media Guidelines, Identifying Print Media and Specifications, Paper Type Specifications User's Guide http://www.dell.com/support/article/us/en/04/SLN265729/zh C2660dn, User's Guide C2665dnf, User's Guide C3760n/C3760dn, User's Guide C3765dnf). Go to step 4 Use a print media that meets the specifications 4 Change the paper Load new flat paper into the Tray and print again Does the error persist during printing? Go to step 5 End of work 5 Check the Feed Rollers Do they have any damage? Are they worn? Go to step 7 Go to step 6 6 Clean the http://www.dell.com/support/article/us/en/19/SLN286287 Feed Rollers Wipe them with a cloth that is slightly dampened with water. Does the error persist during printing? Go to step 7 End of work 7 Remove tray 1 from the unit Turn the unit so you are looking at the left side of the unit. Flip the unit on its side, so the bottom of the unit is visible Pull out on the two tabs to release the bottom chute from the printer Check the chute for any paper in the path Use a flashlight to check the bottom of the feed assembly for any torn paper in the paper path. Reinstall the bottom chute (Make sure the two tabs are seated flat with the back metal plate. If not seated correctly the chute will cause a paper jam as well.) Turn the printer right side up and proceed to test the unit. 8 Replace the Tray 1 Does the error persist? Go to step 8 End of work 9 Print from the other Tray Does the error persist during printing? Contact Dell Technical Support Contact Dell Technical Support Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in d
by User Yes No 1 Verify that Tray 1 is installed properly Reseat the Tray 1 Does the error persist during printing? Got to Step 2 End of work 2 Check the paper path http://www.dell.com/support/article/ed/en/eddhs1/SLN286287 Note: Pieces of paper can be difficult to see, tilt the printer back and look in the chute assembly located just above the paper tray. Remove the foreign objects, or pieces of paper, etc. Does the error persist during printing? Go to step 3 End of work 3 Check Paper Type Does the paper meet the specifications? (Refer to the specific models User's Guide under Print paper jam Media Guidelines, Identifying Print Media and Specifications, Paper Type Specifications User's Guide C2660dn, User's Guide C2665dnf, User's Guide C3760n/C3760dn, User's Guide C3765dnf). Go to step 4 Use a print media that meets the specifications 4 Change the paper Load new flat paper into the Tray and print again Does the error persist during printing? Go to step 5 End of work 5 Check the Feed Rollers Do dell c3760dn paper they have any damage? Are they worn? Go to step 7 Go to step 6 6 Clean the Feed Rollers Wipe them with a cloth that is slightly dampened with water. Does the error persist during printing? Go to step 7 End of work 7 Remove tray 1 from the unit Turn the unit so you are looking at the left side of the unit. Flip the unit on its side, so the bottom of the unit is visible Pull out on the two tabs to release the bottom chute from the printer Check the chute for any paper in the path Use a flashlight to check the bottom of the feed assembly for any torn paper in the paper path. Reinstall the bottom chute (Make sure the two tabs are seated flat with the back metal plate. If not seated correctly the chute will cause a paper jam as well.) Turn the printer right side up and proceed to test the unit. 8 Replace the Tray 1 Does the error persist? Go to step 8 End of work 9 Print from the other Tray Does the error persist during printing? Contact Dell Technical Support Contact Dell Technica