Pppd 0 Died Pppd Options Error Exit Code 2
Contents |
2009, 11:14 PMEnvironment: Dell Optiplex GX110, 800MHz PIII 192 MB RAM USRobotics 5610 modem - pci slot - should work out-of-the-box with linux. Ubunty Jaunty 9.04 (While this does have pppd exit codes on-board ethernet, the finished box will be sent to my brother who only has
The Ppp Daemon Has Died Exit Code 16
dialup.) At first Gnome PPP wouldn't recognize the modem, so I followed the directions here (http://ubuntuforums.org/showpost.php?p=441910&postcount=1). Now the modem is visible pppd exited with error code 16 to Gnome PPP. Then I did a 'sudo wvdialconf', edited /etc/wvdial.conf, and did 'sudo pppconfig' I also did this: $ sudo chmod a+x /usr/sbin/pppd $ sudo chmod a+rw /etc/ppp/pap-secrets $ sudo chmod a+rw /etc/ppp/chap-secretsbecause I
The Ppp Daemon Has Died: A Modem Hung Up The Phone (exit Code = 16)
was getting feedback from Gnome PPP's log that the files were not editable, and I'd rather not attempt to get my newbie family members to sudo on terminal. So now, I've gotten this far with Gnome PPP: --> Ignoring malformed input line: ";Do NOT edit this file by hand!" --> WvDial: Internet dialer version 1.60 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATM1L1DT7065554801 --> Waiting for carrier. ATM1L1DT7065554801 CONNECT 24000/ARQ/V34/LAPM/V42BIS --> Carrier detected. Waiting for prompt. Level 3 Comm nas111.atl1 UQKT2 Username:/login:/Login: --> Looks like a login prompt. --> Sending: me@myself.i me@myself.i Password: --> Looks like a password prompt. --> Sending: (password) Entering PPP Session. IP address is 4.154.124.145 MTU is 1500. --> Looks like a welcome message. --> Starting pppd at Fri May 8 17:26:03 2009 --> Pid of pppd: 6402 --> Disconnecting at Fri May 8 17:26:04 2009 --> The PPP daemon has died: pppd options error (exit code = 2) --> man pppd explains pppd error codes in more detail. --> I guess that's it for now, exiting --> The PPP daemon has died. (exit code = 2) I can hear the gerbils inside the modem rattling their cage and answering the phone, so I know the card is good. I just am not sure why I'm getting (exit code = 2). I even tried setting the speed as low as 38, rather than 56 or 115 in Gnome PPP. No dice. Error Code 2 from the pppd man page: "An immediately fatal error of some kind occurred, such as an essential system call fa
here for a quick overview of the site Help Center Detailed answers to any questions you might have Meta Discuss the workings and policies of this site About Us Learn more about Stack Overflow the company Business Learn more about hiring developers or posting ads with us Unix & Linux Questions Tags Users Badges Unanswered Ask Question _ Unix & Linux Stack Exchange is a question and answer site for users of Linux, FreeBSD and other Un*x-like operating systems. Join them; it only takes a minute: Sign up Here's how https://ubuntuforums.org/archive/index.php/t-1153425.html it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the top wvdial: The PPP daemon has died: Pty program error (exit code = 9) up vote 3 down vote favorite I tried to configure AnyDATA ADU890-WH modem to work in Linux, but I have not succeeded. I am client of Czech carrier O2 and using Ubuntu http://unix.stackexchange.com/questions/146187/wvdial-the-ppp-daemon-has-died-pty-program-error-exit-code-9 14.04. I have once managed to connect using Network Center, Mobile Broadband tab - but since then I have not succeeded. This is my wvdial.conf: [Dialer Defaults] Init2 = ATQ0 V1 E1 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Phone = *99# Stupid Mode = 1 ISDN = 0 Username = a Init1 = ATZ Password = a Modem = /dev/ttyUSB0 Dial Command = ATDT Baud = 9600 [Dialer CDMA] Auto DNS = 0 Init1 = ATQ Init2 = ATZ Stupid Mode = 1 Phone = #777 Idle Seconds = 0 Modem = /dev/ttyUSB0 Username = 601xxxxxx@cz.o2.com Dial Command = ATDT Password = xxxxxx Baud = 1500000 [Dialer three] Init2 = ATZ Init3 = ATQ0 V1 &D2 &C1 S0=0 +IFC=2,2 Init5 = AT+CGDCONT=1,"IP","internet" ISDN = 0 Modem = /dev/ttyUSB0 Modem Type = Analog Modem And this is important part of /var/log/syslog file: Jul 23 20:25:07 wigos-hp-lx pppd[5524]: pppd 2.4.5 started by root, uid 0 Jul 23 20:25:07 wigos-hp-lx pppd[5524]: Using interface ppp0 Jul 23 20:25:07 wigos-hp-lx pppd[5524]: Connect: ppp0 <--> /dev/ttyUSB0 Jul 23 20:25:07 wigos-hp-lx NetworkManager[740]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jul 23 20:25:07 wigos-hp-lx NetworkManager[740]: SCPlugin-Ifupdown: device added (path: /sys/d
Date: Sat, 28 Apr 2007 14:20:51 +0200 Message-id: <46333C23.2040202@sbb.co.yu> In-reply-to: <46332DBE.6080506@infomed.sld.cu> References: <46332DBE.6080506@infomed.sld.cu> Carlos Manuel GV wrote: > My problem: > > I have a M70 Toshiba Satellite and Debian 4.0 installed. > I already https://lists.debian.org/debian-user/2007/04/msg04489.html have sl-modem-daemon packet and I´ve configured several times > /etc/wvdial.conf and checked /etc/ppp/ppers/wvdial, pap-secrets and > chap-secrets, and from root I gave privileges to users have access to them. > I https://www.opennet.ru/openforum/vsluhforumID1/55385.html have gnome-ppp too to access ppp from gnome. > > By wvdial through root, I almost get modem connected but I always get an > error in idle time that doesn´t exit code let me contiune. > > With gnome-ppp have the next error-message: > <***************> > > --> Ignoring malformed input line: ";Do NOT edit this file by hand!" > --> WvDial: Internet dialer version 1.56 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 the ppp daemon +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATM1L3DT060110 > --> Waiting for carrier. > ATM1L3DT060110 > CONNECT 52000 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Sat Apr 28 12:48:03 2007 > --> Pid of pppd: 4033 > --> Disconnecting at Sat Apr 28 12:48:04 2007 > --> The PPP daemon has died: pppd options error (exit code = 2) > --> man pppd explains pppd error codes in more detail. > --> I guess that's it for now, exiting > --> The PPP daemon has died. (exit code = 2) > > ***************> > > I´ll really appreciate if you can guide me, last time with Debian in my > PC I got my modem ready, but now I can´t. > > Thanks a lot, > > B. > > Did you look at 'man pppd'? Here is what is says for your error code: 2 An error was detected in processing the options given, such as two mutually exclusive options being used. Reply to: debian-user@lists.debian.org Marko Randjelovic (on-list) Marko Randjelo
Изначальное сообщение [Проследить за развитием треда] Межсетевой экран ИКС: контроль, журналирование, фильтрация. Защита персональных данных. Антивирус. Политики доступа, контроль HTTPS-трафика. "pppd options error (exit code 2)" Сообщение от micolo on 11-Апр-05,08:25(MSK) Доброго времени суток! У меня проблема - пытаюсь подключиться к интернету. Стоит Suse 9.2. В логах следующее: SuSE Meta pppd (smpppd-ifcfg), Version 1.50 on micolo. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Status is: lurking Status is: disconnected pppd[0] died: pppd options error (exit code 2) Настройки довольно стандартые. С виндовоза с тойже машины выхожу без проблем. Подскажите в чём тут дело. Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх Оглавление pppd options error (exit code 2), fantom, 10:29, 11-Апр-05, (1) pppd options error (exit code 2), micolo, 12:49, 11-Апр-05, (2) pppd options error (exit code 2), ipmanyak, 12:55, 11-Апр-05, (3) pppd options error (exit code 2), micolo, 12:59, 11-Апр-05, (4) pppd options error (exit code 2), micolo, 13:46, 11-Апр-05, (5) pppd options error (exit code 2), micolo, 16:46, 11-Апр-05, (6) pppd options error (exit code 2), Асен Тотин, 01:54, 12-Апр-05, (7) pppd options error (exit code 2), micolo, 08:32, 12-Апр-05, (8) pppd options error (exit code 2), fantom, 11:34, 12-Апр-05, (9) pppd options error (exit code 2), Асен Тотин, 12:20, 12-Апр-05, (10) pppd options error (exit code 2), micolo, 07:21, 15-Апр-05, (11) pppd options error (exit code 2), Асен Тотин, 13:06, 15-Апр-05, (12) Индекс форумов | Темы | Пред. тема | След. тема Сообщения по теме 1. "pppd options error (exit code 2)" Сообщение от fantom (??) on 11-Апр-05,10:29(MSK) Конфиг