Dell Optiplex Error Codes 2 4
Contents |
reference guide to the OptiPlex Diagnostic Indicators Dell OptiPlex systems have a long history of built in diagnostic indicators. These can be audible beeps, power buttons that display different states and colours, specific diagnostics LEDs or a combination of them all, in dell optiplex 755 error codes 2 and 4 order to indicate at which point during the Power On Self Test
Dell Optiplex 755 Error Codes 3 And 4
(POST) a system is having issues. The following article is a reference guide to the codes available on each dell optiplex gx270 error codes model and what those codes actually mean. These change through the various models and years. These indicators are merely a starting point to narrow down any troubleshooting you will carry out
Dell Optiplex Gx280 Error Codes
to identify the cause of your current issue. You can use this as a starting point to narrow down the proper troubleshooting guide you will need or you can contact technical support for further help and they will be looking for these indicators as well. Table of Contents: Diagnostic LEDs for the OptiPlex series (Prior to 2005) Diagnostic LEDs for the OptiPlex Series dell optiplex gx620 error codes (2005 to 2009) Diagnostic LEDs for the OptiPlex series (2009 to 2012) Diagnostic LEDs for the OptiPlex series (2012 to Present) OptiPlex Audible Beep Codes Note: For all the tables below, please remember that the diagnostic LEDs only serve as an indicator of the progress through the POST process. These LEDs do not indicate the problem that caused the POST routine to stop. Note: Please be aware that if your system completes POST without stopping on a particular error code and then gives a black screen, the most likely reason is that you are experiencing a No Boot issue and not a No POST issue at all. Back to Top 1. Diagnostic LEDs for the OptiPlex series (Prior to 2005) This series of systems had a block of A, B, C, D LEDs on the back of the chassis that lit up in Green and Amber. I've included a table below with what these indicated. These models were readily identifiable by the rounded fronts and clamshell assembly. Note : Please click on the title of the section you want to open below, in order to see the
Wiki Navigation On the Wiki Wiki Activity Random page Videos Images Community Recent blog posts Forum Contribute Edit this Page Add a Video Add a Photo Add a Page Wiki
Dell Optiplex Gx520 Error Codes
Activity Watchlist Random page Recent changes Front Panel Lights - Optiplex 755, 960,
Dell Optiplex Error Codes 1 3
980 159pages on this wiki Edit Classic editor History Talk0 Diagnostic Lights Edit NOTE: The orientation of the diagnostic lights dell optiplex error lights 3 4 may vary dependent upon the computer type. The diagnostic lights can appear either vertical or horizontal. Light Pattern Problem Description Suggested Resolution The computer is in a normal "off" condition, or a possible pre-BIOS http://www.dell.com/support/article/us/en/04/SLN284978/en failure has occurred. The diagnostic lights are not lit after the computer successfully boots to the operating system. Plug the computer into a working electrical outlet and press the power button. A possible BIOS failure has occurred; the computer is in the recovery mode. Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer. A possible processor failure has occurred. Reinstall the processor http://f5k.wikia.com/wiki/Front_Panel_Lights_-_Optiplex_755,_960,_980 and restart the computer. Memory modules are detected, but a memory failure has occurred. If you have one memory module installed, reinstall it and restart the computer. (see Memory for instructions on how to remove and install memory modules.) If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error. If available, install properly working memory of the same type into your computer. If the problem persists, contact Dell (see Contacting Dell).http://ebay.redplanettrading.com/desktops/case/optiplex780/Optiplex780_SM_DT/diags.htm optional and may not ship with your computer. Enter system setup (see Entering System Setup), review your computer's configuration information, and ensure that the device you want to test http://www.computing.net/answers/hardware/what-do-the-1-3-4-green-lights-on-the-front/71480.html displays in System Setup and is active. Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities media. Starting the Dell Diagnostics From dell optiplex Your Hard Drive Turn on (or restart) your computer. When the DELL logo appears, press
Database CPUs Solaris Novell OpenVMS DOS Unix Mac Lounge Login» Register» Connect» Hardware & Devices ▼ General Hardware CPUs/Overclocking Networking See More... Software ▼ Security and Virus Office Software PC Gaming See More... Operating Systems ▼ Windows 10 Windows 8 Windows 7 Windows XP See More... Off-Topic Tags How-tos Drivers Ask a Question Computing.NetForumsGeneral HardwareGeneral Solved What do the 1, 3, 4 green lights on the front Tags:Dell Optiplex 320 desktoppcproblems Monique Trujillo November 17, 2010 at 08:31:36 Specs: Windows XP, 2.0 gb when I turn on the pc the front panel displays 1, 3, 4 green lights and the pc won't load up or show video See More: What do the 1, 3, 4 green lights on the front Report • ✔ Best Answer Pappy November 17, 2010 at 11:22:15 Dell Diagnostic Lights - http://support.dell.com/support/edo... See in Thread ↓#1 jowah November 17, 2010 at 08:37:11 it's trying to describe the problem to you. look up the documentation for your computer, and find out what that light error code means. Report • #2 XpUser4Real November 17, 2010 at 10:08:24 'it's trying to describe the problem to you.'I guess I learn something new every day...hmmm...my slim optiplex show those numbers on startup and I'm sure they aren't sending me a morse code of some type.can you tap f8 on bootup and get into safe mode?Some HELP in posting on Computing.net plus free progs and instructions Cheers Report • #3 Monique Trujillo November 17, 2010 at 10:15:14 I can't get that far, as soon as I turn it on the lights come on and it locks up right there, doesn't have time t let the video load as well Report • Related Solutions› [Solved] Whats the meaning of 1, 3, 4 green lights on Dell desktop › How to fix Yellow DS light and Link light on cisco DPC3010 › [Solved] What is the most po