Ibm Error Message
When a hardware event is detected by the IMM on a ibm error Flex System Manager Types 7955, 8731, and 8734, the IMM logs that event in the system-event log in the management node. In addition, ibm error message the IMM sends that event to the CMM and to the IBM® Flex System Manager management software. UEFI diagnostic codes UEFI diagnostic codes can be generated when the management node starts up or while the management node is running. UEFI diagnostic codes are logged in the IMM event log in the management node. Parent topic: Troubleshooting the IBM Flex System Manager management software and hardware
Eurosoft/Mylex Faraday A-Tease HP IBM Landmark Microid Research/Mr NCR Olivetti Phillips Phoenix Quadtel Supersoft Tandon Zenith Intel Motherboards: CA810E CC820 SE440BX-2 D810E2CB D810EMO D815BN D815EEA D815EPEA D820LP SE440BX SR440BX JN440BX LB440GX/L440GX N440BX/NA440BX OR840 T440BX RC440BX VC820 For their PS/2 systems, IBM used a system of diagnostic codes to diagnose trouble spots in a given computer. The problem was, these diagnostic codes were never really documented all that well. The codes that I am presenting here are from documents I have read through, found on the web, found in old books, documents and technical papers. As a computer technician, I rely on documentation to guide me through these types of messages. Therefore, I hope to provide this to all those other technicians out there who get the opportunity to work on one of these. And, yes, people still use them and some refuse to give them up. The method for reading these codes is pretty straight forward. The first part of the error code indicates the device that is causing the trouble. The second part gives the meaning of the error. You can think of the first part as the test code and the second part as the fault code. A fault code of 00 indicates that no problem was found. Thus 200 means the system memory was tested. The 00 means that no fault was found. 201 would mean a memory error. 202 would mean memory address error; lines 00-15. This page is rather extensive and will be updated on a regular basis. Like all the other codes out there. If you know of any error codes that I am displaying incorrectly or that aren't here. Let me know and I'll get it corrected as soon as I can. Thanks to Mike Rose for erors 129 and 229! System Board Errors: Code Description 101 System board interrupt failure (unexpected interrupt) 102 BIOS ROM checksum error (PC, XT); timer error (AT, MCA) 103 BASIC ROM checksum error (PC, XT); timer interrupt error (AT, MCA) 104 Interrupt controller error (PC, XT); protected mode error (AT, MCA) 105 Timer failure (PC, XT); 8042 keyboard controller failure (MCA) 106 System board converting logic test failure 107 System board non-maskable interrupt (NMI) test failure; Hot NMI test failure (MCA) 108 System board timer bus test failure 109 DMA test memory select failure 110 PS/2 system board parity check error (MCA); PS/2 system board memory error (ISA) 111 PS/2 adapter memory problem (ISA); PS/2 I/O channel parity check error (MCA) 112 PS/2 watchdog timeout error (NMI) 113 PS/2 DMA arbitration time out error (NMI) 114 PS/2 external ROM checksum error 115 BIOS ROM checksum error, cache parity error, or DMA error 116 System board rea