Canon Mp560 Printer Error Code C000
Contents |
error c000 Published 10/22/2008 09:35 AM | Updated 10/22/2008 09:37 AM I'm receiving the error c000 Solution: Remove an incorrectly inserted ink tankWhen all the ink tanks are mistakenly inserted[ With mistakenly-inserted ink tanks ]The top portion of ink tank is not in place. canon mp560 printer error code b200 The top portion must go beneath the ink color name sticker.[ With properly-inserted ink tanks ]1.
Canon Mp560 Printer Error Contact Service Center
Unplug the power cord.2. Open the top cover and move the print head holder to the center.*Print head holder may be at the left canon mp560 printer error u052 side of the printer (the opposite side of the one shown above).(Lifting the print head holder before sliding it to the center may help you do the operation.)( The printer in the illustration below shows the iP4600 model. )3. Remove canon mp560 printer error 6c10 two left most ink tanks following the procedures below.3-1. First, push down the upper part of the ink tank until it slides under the cover so that the ink tank fits into place.3-2. Then, push the latch lever (A) in the direction of the arrow and pull out the ink tank.Repeat above two steps for another one.4. Pull out the rest of ink tanks one by one:While holding the upper part of the ink tank, remove the ink tank by gently
Canon Mp560 Printer Error Has Occurred
twisting it.Repeat above for the rest of them.5. Turn ON the printer again.6. When the Print Head Holder moves to the ink tank replacement position, insert the ink tanks properly.* Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder until it stops completelyWhen a specific ink tank is mistakenly inserted [ With mistakenly-inserted ink tank ]The top portion of ink tank is not in place. The top portion must go beneath the ink color name sticker.[ With normally-inserted ink tank ]1. Unplug the power cord.2. Open the top cover and move the print head holder to the center.*Print head holder may be at the left side of the printer (the opposite side of the one shown above).(Lifting the print head holder before sliding it to the center may help you do the operation.)( The printer in the illustration below shows the iP4600 model. )3. Remove all the ink tanks except the one mistakenly inserted.(Then, push the latch lever (A) in the direction of the arrow and pull out the ink tank. Repeat above two steps for another one.)4. Pull the mistakenly-inserted ink tank upward, then softly pull it out leftward with an angle.5. Turn ON the printer again.6. When the Print Head Holder moves to the ink tank replacement position, insert the ink tanks properly.* Do not hold the Print Head Holder to stop or move it forcibly. Do
Discussion Printer Personal Printers Office Printers Professional Photo Printers Wireless/Networking Printer/Multifunction Support General Printer Discussion Cinema EOS Cinema EOS Discussions Camcorder Camcorder Discussion Share Your Photos Share Your Photos General Discussion General Discussion canon mp560 printer error 5100 CommunityCategoryBoardUsers turn on suggestions Auto-suggest helps you quickly narrow down your canon printer error code c000 search results by suggesting possible matches as you type. Showing results for Search instead for Do you mean Register · Sign
Canon Printer Error C000 Mg5320
In · FAQs | Forum Guidelines Canon Community : Canon Forum : Printer : Printer/Multifunction Support : What is error code C000 on my MX870 printer mean? ... Reply Topic Options Subscribe to RSS Feed http://canoncanada.custhelp.com/app/answers/detail/a_id/11015/~/lcd-error%3A-error-c000 Mark Topic as New Mark Topic as Read Float this Topic to the Top Bookmark Subscribe Printer Friendly Page « Message Listing « Previous Topic Next Topic » mleesmail New Contributor Posts: 1 Registered: 02-11-2013 What is error code C000 on my MX870 printer mean? How can I fix it? Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content 02-11-2013 https://community.usa.canon.com/t5/Printer-Multifunction-Support/What-is-error-code-C000-on-my-MX870-printer-mean-How-can-I-fix/td-p/14273 11:45 AM 2 people had this problem. Me too Report Inappropriate Content Message 1 of 5 (58,695 Views) Reply 0 Kudos Devin Frequent Contributor Posts: 90 Registered: 01-16-2013 Re: What is error code C000 on my MX870 printer mean? How can I fix it? Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content 02-13-2013 05:44 PM Hi mleesmail,This error indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).2. Make sure all ink tanks are seated properly.3. Make sure all packing materials have been removed.4. Make sure no paper is jammed in the printer.5. Disconnect the printer cable from the printer.6. Close the front cover and turn the printer off.7. Unplug the printer from the power source, and then plug it back in after five minutes.8. Power on the printer.If the error returns, the printer will require service options. Please contact a technical support representative who can provide you with your service options. They can be reached by calling 1-800-652-2666 between
by a Fortune 500 verification firm. Get a Professional Answer Via email, text message, or notification as you wait on our site.Ask follow up questions if you need to. 100% Satisfaction Guarantee http://www.justanswer.com/printers/6p0q3-canon-mp560-error-message-keeps-coming-c000-i.html Rate the answer you receive. Ask Handy--Andy Your Own Question Handy--Andy, Technical Category: Printers https://discussions.apple.com/thread/5292668?tstart=0 Satisfied Customers: 1019 Experience: Helpdesk 56210710 Type Your Printers Question Here... Handy--Andy is online now I have a canon MP560 and error message keeps coming up C000 I This answer was rated: ★ ★ ★ ★ ★ I have a canon MP560 and error message keeps coming up C000I have cleaned cartridges and changed printer error them, I have unplugged and turned on again and I have removed all cables and then re-started - nothing has changed - can you help? Share this conversation Expert: Handy--Andy replied4 years ago. Hello my name is Andy (in the UK)I will deal with your issue as best as I can.JustAnswer is the largest paid online Expert answers marketplaceHiPlease remove all cartridges and print head. Using a moist canon mp560 printer cloth clean the golden contacts on Print head as well as printer. DO NOT touch nozzle of cartridge. Dont insert the cartridge yet.Please do this : 1. Remove the power cable from printer. Remove the USB cable that connects printer to computer (remove it from printer as well as computer's usb port)2. Press the printer power button and keep pressed for 3 minutes then release3. Now plug in the power cable and usb cable (connect printer to computer) and power on the printer.Then plug in the Print head and cartridges.Now see if its working fine. Let me know Ask Your Own Printers Question Customer: replied4 years ago. HelloI have cleaned everything as above and followed all the power on instructions. I now have an error code 6A80can you help further? Expert: Handy--Andy replied4 years ago. Switch the printer OFFPress buttons 1 + 2 + 3 and 4 (simultaneously using four fingers)Keep pressing this four buttons for 10 secondsRelease the On/Off button (number 4) (Keeping pressing the others)After a few seconds (when the printer go ON), release buttons 1, 2, 3 Ask Your Own Printers Question Customer: replied4 years ago. which buttons are 1 2 3 and 4 ? Expert: Handy--Andy rep
Please enter a title. You can not post a blank message. Please type your message and try again. sec1 Level 1 (0 points) Q: My Canon printer MP560 shows an error c000 and flashes yellow and blue alternately. How do I restore function? Posted on Sep 7, 2013 7:50 PM I have this question too Close Q: My Canon printer MP560 shows an error c000 All replies Helpful answers by jeremy_v, jeremy_v Sep 10, 2013 11:37 AM in response to sec1 Community Specialists Sep 10, 2013 11:37 AM in response to sec1 Hi sec1, Thanks for visiting Apple Support Communities. See these articles for some troubleshooting steps that can help:Troubleshooting printer issues in OS Xhttp://support.apple.com/kb/TS3147USB and FireWire Quick Assisthttp://support.apple.com/kb/ht1151Cheers,Jeremy Helpful (0) Reply options Link to this post by PAHU, PAHU Sep 10, 2013 3:36 PM in response to sec1 Level 6 (16,610 points) Sep 10, 2013 3:36 PM in response to sec1 You have a printhead error. You will have to get the printhead replaced at a Canon service center. Helpful (0) Reply options Link to this post This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use. Support Apple Support Communities Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller. Apple Info Site Map Hot News RSS Feeds Contact Us Copyright © Apple Inc. All rights reserved. Terms of Use Updated Privacy Policy Cookie Usage